Kanatechs Stereo Install Kit For 2009+ Mazda6

CAUTION: Installation of these kits may involve cutting plastic parts and/or the handling of sensitive electronics. ShoKits recommends that the work be performed by a professional installer. Any damage to the kit parts during installation or damage to electronic parts due to incorrect installation are not covered under the limited warranty.

Note: If your car comes equipped with a BOSE Premium Sound System you will need to purchase an additional adapter for your new stereo to operate properly.

• This kit is compatible with the factory DVD navigation system but the TV function is disabled. (TV function on the aftermarket car navigation system should work fine.) The system sounds from the factory navigation system may be disabled.

• The information display in the center console becomes disabled.

• Factory AUX Input jack no longer functions.

• Automatic sound Level Control (ALC) becomes disabled.

• There are new, additional displays on the information panel in the center console when using this kit. (See picture above)

• Occasionally vehicle antenna cables are too short, antenna extension cables are available from most reputable car audio installation stores.

• For installation, the factory heater control unit, hazard lamp switch, etc. need to be detached and reassembled on the panel included in this kit.

• Car AV equipment with a front panel size of over 171mm in width and 99mm in height cannot be installed due to clearance issues.

• Car AV equipment up to 172 mm in length may be installed. However, some equipment may be incompatible due to the position of wire connections on the back of the unit causing space conflicts behind the stereo.